Washington Trip Permit vs New York Trip Permit: How the 3-Day and 72-Hour Rules Differ
Table Of Contents
-
Introduction
-
The Short Answer
-
How the Washington 3-Day Rule Works
-
How the New York 72-Hour Rule Works
-
Side-by-Side Comparison
-
Which Trucks Need Each Permit
-
Timing Your Permits on a Cross-Country Run
-
Other Credentials Each State Expects
-
Common Mistakes When Running Both States
-
Why Many Trucking Companies Choose Our Service
-
FAQ
Introduction
Washington and New York sit on opposite ends of the country, but many carriers send trucks to both. When a truck isn't registered for either state, it needs a short-term permit to run there legally.
Both states sell a trip permit, and both permits look simple. The difference is in how the time is counted. A Washington Trip Permit runs by days, while a New York Trip Permit runs by hours. This guide explains how each rule works, who needs each permit, and how to time them so your truck never runs on an expired permit.
The Short Answer
A Washington Trip Permit is valid for three consecutive days, beginning with the day of first use. A New York Trip Permit is valid for 72 hours.
That sounds like the same thing, but it isn't. Washington counts calendar days, so the time of day you start doesn't change the end date. New York counts a continuous 72-hour clock, so the exact start time matters.
How the Washington 3-Day Rule Works
Under RCW 46.16A.320, each Washington Trip Permit:
-
Covers one vehicle, the one identified on the permit,
-
Lasts three consecutive days, beginning with the day of first use,
-
Allows operation at the maximum legal weight for that vehicle,
-
Must be filled out completely and signed by the operator before driving,
-
Must be displayed on the vehicle as required.
Washington also limits how often one truck can use trip permits. No more than three trip permits may be used for any one vehicle in any 30 consecutive days. A violation of the trip permit law is a gross misdemeanor.
How the New York 72-Hour Rule Works
The New York DMV states that a New York Trip Permit is valid for 72 hours. The permit must be obtained before the truck enters New York, and trip permit fees are not refundable.
The 72 hours are a clock, not a mileage allowance:
-
The clock keeps running while the truck is outside New York.
-
It does not reset when a delivery is finished or the truck crosses a state line.
-
Short out-and-back runs may fit inside one permit if they finish before the window ends.
Side-by-Side Comparison
| Feature | Washington | New York |
|---|---|---|
| How long it lasts | 3 consecutive days | 72 hours |
| How time is counted | Calendar days from first use | Continuous hours |
| When to get it | Before driving in Washington | Before entering New York |
| Vehicles covered | One vehicle per permit | One vehicle per permit |
| Usage limit | 3 permits per vehicle in 30 days | None stated by the DMV |
| Without a permit | Gross misdemeanor | Fines, penalties, possible full registration fees |
Which Trucks Need Each Permit
New York. A truck needs a New York Trip Permit when it is an apportionable vehicle, and New York is not on its IRP cab card. That includes power units over 26,000 pounds, combinations over 26,000 pounds, and trucks with three or more axles, whatever their weight.
Washington. A truck needs a Washington Trip Permit when it is treated as unregistered in Washington. Common examples are a truck that would have to register in Washington under reciprocal agreements, a truck with expired tabs, or a truck whose gross weight license is too low for the load.
Timing Your Permits on a Cross-Country Run
Picture a truck that delivers in Washington, then heads east to New York. Here is how to keep both permits on time:
-
Start the Washington Permit on Your First Washington Day. Three consecutive days begin with the day of first use, so don't start it early.
-
Plan to Leave Washington Within Three Days. If the job runs longer, a second permit may be needed, and it counts toward the 3-in-30 limit.
-
Order the New York Permit Before the Border. The DMV requires it before entering New York.
-
Match the New York Start Time to Your Arrival. Every hour before you reach New York is an hour lost.
-
Check Driver Hours Against the Clock. A team may still have legal hours after the 72-hour permit has ended.
Other Credentials Each State Expects
A trip permit covers registration only in both states. It does not replace other credentials:
-
Fuel tax. Carriers without IFTA need a temporary fuel permit in each state.
-
New York Highway Use Tax (HUT). Trucks subject to HUT need a certificate of registration and a decal before running on New York highways.
-
Oversize and overweight. Loads over legal limits need their own permits in both states.
Common Mistakes When Running Both States
-
Treating 72 hours like 3 days. Starting a New York permit at 9 p.m. ends it at 9 p.m. three days later, not at midnight.
-
Using a fourth Washington permit in 30 days. Washington doesn't allow it.
-
Entering New York first and ordering later. A permit bought after entering doesn't cover the miles already driven.
-
Driving in Washington before signing the permit. The operator must sign it first.
-
Forgetting fuel and HUT credentials. A trip permit alone is not enough.
Why Many Trucking Companies Choose Our Service
Washington Trucking Online helps carriers time each Washington Trip Permit to the first day of travel and keep track of the 3-in-30 limit, so every run into Washington stays legal.
-
Trip permit: $95
-
Fuel permit: $95
-
Oversize permit: $98
We provide 24/7 support and work weekends and holidays.
or
FAQ
What is the difference between a Washington Trip Permit and a New York Trip Permit?
A Washington Trip Permit lasts three consecutive days from the day of first use. A New York Trip Permit lasts 72 hours.
Does the New York clock stop when my truck leaves the state?
No. The 72 hours keep running wherever the truck is.
How many Washington Trip Permits can one truck use?
No more than three for any one vehicle in any 30 consecutive days.
Can I get a New York Trip Permit after entering New York?
No. The DMV requires it before the truck enters the state.
How much does your Washington Trip Permit service cost?
Our Washington Trip Permit service is $95.
For more information, visit the Washington State Department of Licensing and the New York State Department of Motor Vehicles.